ALCOTEX 225

One of the core challenges in the suspension polymerization process of polyvinyl chloride (PVC) is polymer scaling on the inner walls and internal components of the reactor. Scale buildup has a negative impact on reactor heat transfer and extends the time it takes for polymerization. More importantly, companies have to do expensive, high-pressure cleaning on their reactors on a regular basis, which reduces how much the equipment can be used. ALCOTEX 225 and ALCOTEX 234 scale inhibitors offer a way to address this issue.     1.Industrial Impacts and Scaling Inhibition Needs of Scaling  Scaling happens in polymerization when free radicals or monomers in water stick to solid surfaces like reactor walls or agitators. They then deposit and polymerize more on these surfaces. These solids, especially metals, can have higher temperatures or provide good places for polymerization, which causes local hot spots or uneven reactions. Scaling has several negative effects on S-PVC production, including:  Limited Production Cycle: A certain number of runs must be completed before shutdown for cleaning, limiting continuous production capacity. Product quality fluctuations: Detached scale contaminating the resin can lead to deterioration in product color, thermal stability, and impurity content. Energy consumption and maintenance costs: Increased energy consumption due to the investment in high-pressure cleaning equipment and labor, as well as decreased heat transfer efficiency. The S-PVC industry focuses on making good scale inhibitors because it helps reactors run longer without stopping.   2. ALCOTEX 225: The Main Barrier Against Reactor Wall Sticking ALCOTEX 225 is clearly defined as a scale inhibitor for vinyl chloride suspension polymerization. Its design goal is to eliminate polymer scale buildup on the inner wall of the reactor. 2.1. Physicochemical Properties Property Typical Value Appearance Dark blue aqueous solution Total Solids 5.0–6.0 PH 12.5–13.0 2.2. Mechanism of Action ALCOTEX 225 (POVAL L-10) achieves anti-sticking by forming an extremely thin protective layer on the inner wall of the reactor. This protective layer primarily functions to: Passivate active sites: Cover and passivate active sites on the metal surface that may initiate free radical polymerization. Change surface energy: Adjust the surface energy of the reactor wall to make it unfavorable for the adsorption and wetting of polymers and monomers. Physical Barrier: Establishes a physical barrier to effectively prevent the adhesion and deposition of VCM monomers or primary polymer particles on the reactor wall. This treatment method ensures the reactor wall remains clean during polymerization, which is key to achieving a significant increase in the number of production runs before cleaning.   3. ALCOTEX 234: Synergistic Protector for Internal Components ALCOTEX 234 is not used alone but is designed to work in conjunction with ALCOTEX 225 as a scaling inhibitor. It focuses on areas that are difficult for ALCOTEX 225 to completely cover or are susceptible to mechanical wear. 3.1. Physicochemical Properties Property Typical Value Appearance Dark blue aqueous solution Freezing Point - 1 Specific Gravity 1.1 Total Solids 19.0-21.0 Viscosity @20℃ < 20 PH > 13.0 3.2. Synergistic Application and Targeted Scaling The main function of ALCOTEX 234 is to eliminate scaling on baffles, agitators, or other areas with poor surface quality inside the reactor. Key Protection Areas: Baffles and agitators are areas subjected to high shear forces during polymerization and are also the areas with the most intense heat transfer and monomer/polymer contact. Scaling in these areas is often more stubborn and difficult to inhibit. Synergistic Effect: By applying ALCOTEX 225 to the reactor walls and ALCOTEX 234 to internal components such as agitators and baffles, a comprehensive, high-strength protection is achieved over the entire polymerization contact surface. This combined application strategy is essential for improving overall production efficiency.   4. Application Implementation and Maximizing Industrial Benefits The use of ALCOTEX 225 and 234 imposes specific requirements on the operation of the polymerization process to ensure maximum effectiveness: Thorough Pretreatment: Before first use of the system, all previous polymerization residues in the reactor must be thoroughly removed, and the reactor must be cleaned and dried. Any residual polymer or impurities will affect the adsorption and film formation of the inhibitor. Formulation and Measurement: The concentration and coating amount of the inhibitor need to be precisely optimized based on the reactor geometry, material, and polymerization formulation of the target PVC product. Industrial Benefits: Successful application of the inhibitor system directly results in higher production runs, significantly increased productivity, and improved stability of PVC resin quality.   The ALCOTEX 225 and 234 system is not merely a cleaning agent, but a specialized surface modification and protection system. Together, they constitute a mature and efficient S-PVC scaling management solution, which is a key technological support for modern PVC polymerization plants to achieve high-yield, stable, and high-quality production.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com

ElephChem Polyvinyl Alcohol (PVA) is generally considered a type of synthetic polymer rather than a plastic. While it shares some properties with plastics, such as being flexible and water-resistant, PVA is classified as a polymer due to its unique chemical structure and behavior.   ElephChem PVA is derived from the polymerization of vinyl acetate, which is then hydrolyzed to remove the acetate groups and produce polyvinyl alcohol. The hydrolysis process converts some of the acetate groups (CH3COO-) into hydroxyl groups (OH-), resulting in a polymer chain with repeating vinyl alcohol units (CH2CHOH). The degree of hydrolysis determines the amount of hydroxyl groups present in the PVA molecule.   Modifications of ElephChem PVA can be done by chemically cross-linking the polymer chain to improve its mechanical and thermal properties. Cross-linking agents, such as borates or aldehydes, can be used to create covalent bonds between PVA chains, leading to a three-dimensional network structure. This cross-linked PVA, known as PVA hydrogel, exhibits enhanced strength, elasticity, and stability compared to non-cross-linked PVA. Such as PVOH 725, PVOH 735, etc.   Other modifications can involve blending PVA with other polymers or adding functional groups to the PVA backbone to impart specific properties or improve its compatibility with different materials or applications. These modifications allow PVA to be used in a wide range of industries, including adhesives, films, coatings, textiles, and packaging.