SBS YH-792E features a linear molecular configuration with an increased styrene content of 40% and zero oil extension. It provides superior mechanical strength with a high tensile strength of 29 MPa and an increased Shore A hardness of 89, while maintaining a smooth processing melt flow index.
SSBR YH-2605 is a solution styrene-butadiene rubber (SSBR) grade based on a random copolymer structure. It contains approximately 25% styrene and is supplied in the form of a white block. It provides a practical balance between processing characteristics and rubber compound performance.
Overview
DCR114 Series Chloroprene Rubber is a copolymer of chloroprene and dichlorobutadiene, using sulfur as a regulator. It has a density of 1.23 and is a yellowish or light brown block-shaped material. It possesses excellent anti-crystallization properties and good molding adhesion, making it the preferred rubber for high-strength dynamic products, and also exhibiting high cold resistance.
Overview
VAE Emulsion CW 40-905 does not use any raw materials containing formaldehyde or APEO. It has a higher environmental quality and low viscosity.
TPE YH-165 is a linear-structure thermoplastic elastomer characterized by a styrene content of 40%. Its volatile matter content is limited to ≤0.7 wt%, with no added oil content specified. Supplied as white fluffy particles, YH-165 combines a relatively high hardness profile with strong tensile performance and measurable melt flow characteristics, making it a distinctive grade within the YH linear TPE series.
SBS YH-796E is a linear grade characterized by a lower styrene content of 20% and an un-oiled matrix. It exhibits high elasticity and a lower hardness of 60 Shore A, coupled with a higher melt flow rate (2 g/10min) and a high toluene solution viscosity, ensuring high flexibility and elasticity.
SSBR YH-4003H is a solution styrene-butadiene rubber grade characterized by a random copolymer structure and relatively high styrene content. It is supplied as a white block for industrial rubber compounding and processing.
Overview
Polychloroprene Rubber DCR213M is a copolymer of chloroprene and dichlorobutadiene, using dodecyl mercaptan as a regulator. It has a density of 1.23 and is a milky white or beige block-shaped solid. It possesses excellent resistance to crystallization.
Overview
PVOH 728F is a low-molecular-weight polyvinyl alcohol (PVOH) product typically present as pale yellow granules. This product is specifically designed for the production of PVOH grades specifically for PVA film.
Overview
PVOH 725 PVC Grade is a 71 mol% hydrolyzed polyvinyl alcohol specifically developed as a primary suspending agent for suspension polymerization of vinyl chloride. It offers low molecular weight and low viscosity.
Overview
VAE Emulsion CW 40-907 is an environmentally friendly upgraded product. It does not contain any raw materials containing formaldehyde or APEO. It has a low viscosity and low ethylene content.
TPE YH-179 is a linear thermoplastic elastomer grade with 30% styrene content, designed with a distinctive balance of mechanical properties and melt processability. The volatile matter content is maintained at ≤1 wt%, and the formulation contains no oil. Presented in white fluffy particle form, YH-179 is distinguished by its relatively low melt flow rate and well-defined physical property profile.
SBS YH-791H is a linear structure copolymer containing 30% styrene with 0% oil content, specifically engineered for ultra-low melt flow (0.1 g/10min) and high molecular weight stability. It yields a strong tensile strength of 20 MPa and a standard Shore A hardness of 76.
SSBR YH-2563-6 is a solution styrene-butadiene rubber grade with a random copolymer structure, designed with a relatively high vinyl content and oil extension. It contains 25% styrene and approximately 65% vinyl content, providing a polymer structure suitable for formulations where controlled molecular characteristics and balanced processing performance are required.
Overview
Polychloroprene Rubber DCR213X is a chloroprene rubber produced by emulsion polymerization using diisopropyl xanthogen disulfide as a regulator and chloroprene and dichlorobutadiene as comonomers. It has a density of 1.23 and is an off-white or yellowish block-shaped material. It exhibits excellent resistance to crystallization.
Overview
PVOH 823T is a medium-molecular-weight polyvinyl alcohol (PVOH). A unique batch process effectively controls the degree of hydrolysis and particle size.
TPE YH-188E is a linear thermoplastic elastomer with a styrene content of 34%, offering a Shore A hardness of 85 and tensile strength of 26 MPa. With zero oil content and a white fluffy particle appearance, this grade presents a well-defined combination of hardness, tensile strength, and melt flow behavior. Its physical specifications provide a clear reference for evaluating material consistency and processing characteristics.
SBS YH-4303-2E is a radial styrene-butadiene-styrene block copolymer with 30% styrene content, designed with a balanced combination of mechanical strength and processing performance. The grade has no oil content and a volatile matter content of ≤1 wt%, while its toluene solution viscosity is approximately 1100 mPa·s at 25°C based on a 15% solution.
JiangSu ElephChem Holding Limited is an established market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.
Quality is the cornerstone of everything we do, and it is reflected in every product we deliver.
Exclusive Team Member
EXPERT MEMBERS
0
Satisfied Clients
TRUSTED PEOPLE
0K
Our Local & Global Stores
GLOBAL PARTNER
0
Monthly production capacity
Ton
0
Latest News
JiangSu ElephChem Holding Limited is an established market expert in Polyvinyl Alcohol(PVA) and Vinyl Acetate–ethylene Copolymer Emulsion(VAE) with strong recognition and excellent plant facilities of international standards.
IPv6 network supported