VINNAPAS 6300

Choosing the appropriate binder is often the decisive factor in high-performance adhesive formulation. As end-user requirements become increasingly stringent—demanding higher line speeds, superior adhesion to difficult substrates, and stricter environmental compliance—vinyl acetate-ethylene (VAE) copolymer technology has established itself as a versatile benchmark across Asia-Pacific and global markets.   1.The Chemistry Behind VAE Copolymer Systems VAE dispersions are water-based systems produced by copolymerizing vinyl acetate and ethylene monomers. Each monomer contributes distinct mechanical and physicochemical properties to the polymer backbone:   Vinyl Acetate (VAC) Segment: Provides structural rigidity, polarity, and high glass transition temperature (Tg ≈ 32℃). The polar nature ensures strong cohesion and adhesion to hydrophilic substrates. Ethylene Segment: Acts as an internal, permanent plasticizer (Tg ≈ -125℃). Ethylene incorporation imparts permanent flexibility, non-polar characteristics, hydrophobic resistance, and high saponification stability without requiring external plasticizer additives. By altering the ethylene content during polymerization, the glass transition temperature (Tg) of VINNAPAS VAE dispersions can be precisely tuned across a broad spectrum, ranging from -35℃ to +30℃.      2. Key Technical Advantages in Processing & Performance Formulating with VINNAPAS VAE emulsions delivers several key operational benefits: Broad Substrate Adhesion: Excellent bonding to polar substrates (paper, wood) as well as low-energy/non-polar plastic surfaces (OPP, PET, coated board, and foils). High-Speed Machinability & Re-emulsification: Essential for jetting/nozzle (HH) application systems, preventing nozzle clogging and buildup during fast packaging operations. Balanced Cohesion, Tack, and Heat Resistance: Offers rapid setting speed alongside high wet tack and thermal stability.   3. Product Portfolio Comparison & Technical Data The following reference guide highlights the most commonly specified VINNAPAS® grades in packaging, woodworking, pressure-sensitive, and film lamination applications: Product Model Polymer Type Solid Content (%) Viscosity (mPa·s) PH Key Performance & Application Characteristics VINNAPAS EP 701K VAc-E 55 2,000 - 4,000 4-6 Universal binder for paper packaging. Outstanding performance in high-speed nozzle (HH) jetting, foil-to-paper, and film-to-wood lamination. VINNAPAS EP 706K VAc-E 55 4,400 - 5,400 4-6 High-viscosity version of EP 706. Offers strong wet tack, excellent nozzle jetting stability, and versatile film-to-wood lamination. VINNAPAS EP 707K VAc-E 55 1,300 - 2,000 4-6 Low viscosity combined with rapid setting speed and high flexibility. Demonstrates superior cohesion and water resistance. VINNAPAS EP 724 VAc-E 55 1,500 - 2,500 4-6 High tensile & cohesion strength and thermal resistance. Often blended with PVAc homopolymers to boost initial tack and speed. VINNAPAS 320 VAc-E 55 800 - 2,000 4-6 High-solid VAE delivering excellent flowability, rapid substrate wet-out, and strong adhesion to various rigid surfaces. VINNAPAS EAF 68 VAc-E-A 58-62 4,500 - 9,500 4-5 Acrylic-modified VAE pressure-sensitive emulsion. Engineered for high shear resistance and exceptional bonding on OPP, PET, and UV coatings. VINNAPAS 6300 VAc-E 63 600 - 1,500 4.3-5.3 High solids with carboxylic acid functionality. Offers versatile compounding flexibility, fast setting speed, and alkaline aqueous cleanability. VINNAPAS DPN 15 VAc 52 12,000 - 18,000 2.2-3.5 Benchmark binder for wood adhesives meeting D3/D4 water resistance standards.     4. Formulation Selection Guide by End-Use Application Packaging & High-Speed Jetting: VINNAPAS EP 701K, VINNAPAS EP 706K, and VINNAPAS 320 are industry standards for paper packaging, envelope converting, and non-contact nozzle applications. Film Lamination & Plastic Substrates: VINNAPAS EAF 68 and VINNAPAS 6300 excel on non-polar or low-energy substrates including OPP, PET, and UV-coated surfaces. Woodworking & Waterproof Adhesives: VINNAPAS DPN 15 and VINNAPAS EP 724 deliver high cohesion and heat/water resistance required for 3D membrane pressing and D3/D4 rated formulations.   Website: www.elephchem.com whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com

Adhesives are essential for almost every item we use in our daily lives, from furniture and flooring to packaging. Traditional adhesives, such as solvent-based glues and bone glue, have long dominated the market. However, with growing environmental awareness and technological advancements, a new adhesive, VAE Emulsion (Vinyl Acetate–ethylene Copolymer Emulsion), is gradually entering our market.     I. Introduction to VAE Emulsions Vinyl acetate and ethylene copolymer emulsions typically contain 0-30% vinyl groups. Ethylene acts as an internal plasticizer. A higher vinyl content results in a lower glass transition temperature, a softer resin, and greater flexibility. Ethylene also has low polarity and excellent water resistance. Previously, only polyvinyl acetate emulsions were available, but these had poor water resistance and flexibility, and also exhibited poor adhesion to non-polar or less polar materials such as polyethylene and polyvinyl chloride. VAE emulsions are used in wood glue, paper packaging adhesives, architectural coatings, mortar modification (e.g., waterproofing), and even plastic film lamination.   2. Advantages of VAE Emulsions in Architectural Coatings Low VOC Low-VOC latex paints using VAE emulsions (such as VAE Emulsion CW 40-600) provide a high-quality interior environment with excellent workability and good color development. In Europe, over 90% of zero-/low-VOC interior wall paints use VAE emulsions. VAE emulsions are the primary binder used in cigarette adhesives. Compared to acrylic emulsions, vinyl acetate emulsions contain fewer benzenes and aromatic hydrocarbons. Furthermore, they do not require the addition of coalescing agents. Acrylic emulsions, on the other hand, lack the ability to achieve both film-forming and scrub resistance, necessitating the addition of coalescing agents to ensure a high Tg. Vinyl acetate, on the other hand, is softened by water, eliminating the need for coalescing agents.   Weatherability The presence of vinyl monomers in VAE emulsions increases the polymer's hydrophobicity, resulting in excellent water resistance in the resulting coating. This is crucial for outdoor coatings, as it prevents rain from eroding the coating, leading to blistering, cracking, and flaking. Chalking Resistance: Chalking is the phenomenon of paint decomposing due to aging under the influence of ultraviolet light and oxygen, resulting in the formation of white powder on the surface. VAE emulsions have excellent chalking resistance, which helps the coating maintain its appearance and protective properties over time. Flexibility and Crack Resistance: VAE emulsion coatings exhibit excellent flexibility, adapting to the expansion and contraction of the substrate due to temperature fluctuations. This effectively prevents cracking caused by stress concentration in the coating, thereby extending the coating's service life. Adhesion: VAE emulsions (such as VAE Emulsion CW 40-602) exhibit excellent adhesion to a variety of substrates, including common building materials such as cement and bricks. Even in adverse weather conditions, the coating remains firmly attached to the wall and resists peeling.   Cost Advantages First, there is no need to purchase expensive solvents, reducing raw material costs. Second, its high solids content means that less material is required for the same bonding effect. More importantly, it reduces environmental remediation costs associated with hazardous emissions and potential safety risks. For businesses, choosing VAE emulsions is not only a positive response to environmental regulations but also a long-term, sustainable economic investment.   Strong Adhesion Used in Mortar Mixing: VAE emulsion, when added to mortar, increases strength, improves adhesion to various substrates, enhances wear and impact resistance, improves water absorption and permeability, and improves chemical resistance. This polymer mortar is currently widely used due to its excellent properties. Characteristics of Mortar Mixed with VAE Emulsion: When VAE is added to mortar, many properties are improved, as shown in Figure 1. However, the performance of the mortar varies depending on the amount of emulsion added. According to Sumitomo Corporation's research, a P/C (polymer weight/cement weight) ratio of 0.1-0.4 is the optimal ratio for both performance and economics. Increasing Mortar Strength: The fluidity (flow value) of mortar increases with the amount of emulsion added. This fact demonstrates that by adding emulsion, the amount of water can be reduced, resulting in a denser hardened material, increased strength, and reduced shrinkage and water absorption. Improving Mortar Brittleness: When VAE emulsion is mixed into the mortar, vibration-absorbing polymer particles fill the voids in the cement, improving the mortar's impact resistance.   3. Future Development Trends of VAE Emulsions Non-PVA Emulsifier Systems Using a surfactant system and soap-free polymerization technology eliminates the drawbacks of poor water resistance and large particle size caused by PVA's water resistance. Copolymer Systems Using versatate vinyl carbonate, it leverages its high weathering, water, and alkali resistance.   With the growing global focus on sustainable development and green manufacturing, the environmental and health issues associated with traditional adhesives are facing increasing challenges. As a high-performance, environmentally friendly, and versatile adhesive, VAE emulsions are experiencing rapidly growing market demand. Their applications are not only expanding in traditional wood processing, paper products, and textiles, but are also showing great potential in emerging areas such as automotive interiors, building materials, and battery bonding.   Website: www.elephchem.com Whatsapp: (+)86 13851435272 E-mail: admin@elephchem.com